Product Overview
The Corrugated Carton Waste Stripper Machine is a pneumatic scrap removal tool designed for removing waste edges and unwanted paper sections from die-cut cardboard and corrugated sheets. It uses a pneumatic motor to drive a high-speed tooth chain, which grips and pulls waste paper from pre-cut connection points.
This machine is commonly used after die cutting processes in carton manufacturing and printing factories. It helps simplify manual waste stripping operations for corrugated boxes, cardboard packaging, and other die-cut paper products, providing a practical solution for improving post-processing efficiency.
Key Features
- Pneumatic motor drives the tooth chain to remove waste edges quickly and efficiently.
- Suitable for removing waste edges from cardboard, fine corrugated paper, and regular corrugated board.
- Helps replace traditional manual waste removal methods and reduce labor requirements.
- High-speed rotating tooth chain provides stable waste pulling performance.
- Tooth chains are made of heat-treated high-strength alloy steel with good wear resistance and long service life.
- Different tooth chain types are available according to different cardboard structures and waste removal requirements.
- Easy operation with a compact structure for flexible use in different working areas.
- The pneumatic power system provides safe operation without electrical drive components.
- Compared with manual scrap removal, it helps reduce processing time and improve production flow.
- The tooth chain is easy to replace and maintain.
Technical Parameters
| Machine Type | Adaptation chain | Speed | Intake pipe diameter | Use air pressure | Air consumption | Air inlet size | Net Weight |
| JYTP-250 | Small teeth/large teeth/medium teeth/medium teeth double teeth (17 rows of teeth) | 2500 RPM | 8*12mm | 4-8kg | 0.4m³/min | 1/4“ | 3kg |
| JYTP-350 （Enhanced Type） | Small teeth/large teeth/medium teeth/medium teeth double teeth (18 rows of teeth) | 3800-4500 RPM | 8*12mm | 4-8kg | 0.4m³/min | 1/4“ | 3kg |
| JYTP-380 （Enhanced Type） | Large teeth/medium teeth/medium teeth double teeth | 4500 RPM | 8*12mm | 4-8kg | 0.4m³/min | 1/4“ | 5kg |
Suitable Materials
The Corrugated Carton Waste Stripper Machine is suitable for:
- Cardboard (200–500 g/m²)
- Single-layer corrugated board
- Double-layer corrugated board
- Fine corrugated paper
- Regular corrugated paper
- Die-cut paper products with waste connection points
Applications
The machine is mainly used for:
- Removing waste edges after die cutting
- Removing inner waste sections from die-cut cardboard
- Separating finished carton blanks from surrounding scrap
- Post-processing of corrugated packaging products
Typical products include:
- Die-cut corrugated boxes
- Folding cartons
- Packaging inserts
- Display packaging components
- Customized paper packaging products
Working Process
1. Prepare Die-Cut Cardboard
Die-cut cardboard sheets should have small connection points between the product and waste areas, allowing the tooth chain to grip and remove waste sections.
↓
2. Connect Air Supply
Connect the machine to an air compressor using an 8×12 mm air hose and adjust the working air pressure according to operating requirements.
↓
3. Start Waste Removal
Place the die-cut cardboard on the working surface. Position the tooth chain at the waste connection point and start the pneumatic motor.
↓
4. Pull Out Waste Sections
Move the machine along the waste edge. The rotating tooth chain grips the waste paper and continuously removes unwanted sections from the cardboard.
↓
5. Separate Finished Products
After waste removal is completed, separate the finished carton blanks and check the edges and surfaces.
↓
6. Cleaning and Maintenance
Clean paper dust from the machine and chain area after operation. Add pneumatic lubrication oil when required and store the machine properly.
Why Choose This Machine
- Designed specifically for corrugated carton and cardboard waste removal.
- Reduces dependence on manual scrap stripping operations.
- Pneumatic operation provides flexible use without electrical drive systems.
- Compact design allows convenient operation beside existing production equipment.
- High-strength alloy tooth chain provides stable waste pulling performance.
- Helps improve workflow after die cutting processes.
- Suitable for different cardboard and corrugated paper structures.
Recommended Industries
Suitable for:
- Corrugated carton manufacturers
- Printing and packaging companies
- Die-cut packaging producers
- Folding carton manufacturers
- Paper product processing factories
- Customized packaging suppliers
FAQ
1. What is a Corrugated Carton Waste Stripper Machine used for?
A Corrugated Carton Waste Stripper Machine is used to remove waste edges and unwanted paper sections from die-cut cardboard and corrugated sheets after the die cutting process.
2. How does the waste stripper machine work?
The machine uses a pneumatic motor to drive a tooth chain at high speed. The teeth grip the waste paper connection points and pull the waste material away from the finished product.
3. Does the machine require compressed air?
Yes. The machine uses a pneumatic motor and requires an external air compressor supply. The recommended working air pressure is generally 4–8 kg/cm².
4. Can this machine remove waste from corrugated cardboard?
Yes. It is suitable for removing waste from cardboard, fine corrugated paper, and single or double-layer corrugated board according to the waste structure and tooth chain selection.
5. Does the machine damage finished cartons during waste removal?
When operated correctly, the machine removes waste sections through existing die-cut connection points and helps reduce damage compared with manual hammer-type waste removal methods.
6. What types of tooth chains are available?
Different tooth chain types, including small teeth, medium teeth, large teeth, and double-tooth configurations, are available to match different cardboard materials and waste removal requirements.
7. How should the pneumatic waste stripper be maintained?
Regular cleaning of paper dust, checking tooth chain condition, tightening loose components, and adding pneumatic lubrication oil help maintain stable operation.
8. What process is this machine used after?
It is normally used after die cutting and before subsequent processes such as folding, gluing, or packaging.
