Automatic flute laminator

Advanced automatic tracking technology, according to the size of the paper automatically adjust the relevant parameters, so that the machine is always running in the best condition

Description

Characteristic of Paper Feeding Department:

  1. The suction paper can better adapt to the curved cardboard;
  2. Adopt high-end electromagnetic clutch and electromagnetic brake system, so that the paper feeding part can be controlled separately,simple and reliable operation;
  3. The crimping wheel is adjustable, suitable for cardboard thickness of 2-8mm;
  4. The secondary indentation mechanism can perform secondary indentation on cardboard with poor indentation quality.

Characteristic of the gluing folding department:

  1. The structure is simple and reliable, the amount of glue can be controlled, and the cleaning is convenient;
  2. The stainless steel rubber coating wheel is used to spread the glue uniformly, without failure, and save the amount of glue;
  3. Imported wear-resistant rubber belt is used to transport the cardboard, which is automatically folded;
  4. Cardboard straightening device and crimping straightening device;

Characteristic of counting accumulation output department:

  1. Advanced automatic tracking technology, according to the size of the paper automatically adjust the relevant parameters, so that the machine is always running in the best condition
  2.  Unique front gauge positioning system, accuracy and the bottom paper never exceed; top paper exceed adjustable
  3. Equipped with high precision high speed automatic feeder, strengthening type paper feeding device, feeding smoothly
  4. Equipped with high precision high speed automatic feeder, strengthening type paper feeding device, feeding smoothly
  5. Using the principle of offset printing machine side gauge positioning, error correction for about top paper stack and feeding process
  6. Bottom paper using suction automatic feeding, can adjust wind strength in the touch screen, and is equipped with a belt humidifying function
  7. Standby stack table can pile paper under non-stop situation, along the rail into the elevator, high working efficiency
  8. Imported electrical components, to ensure the stability of the circuit system, PLC tracking technology, automatic fault alarm
  9. Fully automatic glue supplementary system, can automatically replenish the loss of the amount of glue, and cooperated with the glue recycling
  10. Independent water tank control cycle, ensure the bottom paper back dry, at the same time cleaning up roller, glue receive tank and back glue tank
  11. Single side adjustment of the roller pressure, and equipped with a dial gauge, the replacement of the bottom paper one-step-to-reach

Parameter of the automatic flute laminator machine:

Model YB-1300E YB-1450E YB-1650E
Max Sheet size 1300*1250MM 1450*1250MM 1650*1450MM
Min Sheet size 400*400MM 400*400MM 400*400MM
Top sheet thickness 150-600GSM 150-600GSM 175-700GSM
Bottom sheet thickness A.B.C.E.F corrugated paper, industrial cardboard
Machine speed 7000sheets/Hour 7000sheets/Hour 7000sheets/Hour
Fitting precision ±1mm ±1mm ±1mm
Measurement 11.5x2x2.4M 11.5x2x2.4M 11.5x2x2.4M
Machine weight 5000KG 5500KG 6000KG
Machine Power 10KW/380V 11KW/380V 12KW/380V

Useage of the automatic flute laminating machine: A mechanical device that glues two pieces of cardboard together according to certain requirements. The laminating machine is suitable for laminating and bonding any two kinds of materials between a variety of corrugated cardboard or cardboard and color printing paper.